Purchasing Glass

Whether actually ordering or just requesting a quote, it is important that the guidlelines below be followed.

Notice: For measuring arched openings you will need a pencil, paper, scissors or a razor and a straight edge ruler.

 

For Square & Rectangular Cabinet Openings:

• From the back of your cabinet door, measure exactly the width and height of your rough opening. It is best to round down to the nearest 1/16" (sixteenth of an inch).
  Example: 14-1/4" should be rounded down to 14-3/16"

• For a sure fit up, deduct 1/8" from the width and height of your opening.
  Eample: 15" x 26" rough opening should be ordered as 14-7/8" x 25-7/8". It's that easy!

For Arched Openings:

• Lay your cabinet door face down on a flat surface.

• Trace the back outline of your door onto your paper pattern by rubbing a pencil along the edges of your door opening. It is best to tape your paper pattern in place before you start pencil outlining.

• After outlining, cut the paper pattern carefully using a scissor or razor and a straight edge. Remember to cut your pattern approximately 1/8" smaller than your width and height.
  Eample: If your opening is 12" x 18", your pattern should be 11-7/8" x 17-7/8" - Send your drawn pattern to us: It's that easy!

Request a quote for your custom pattern by clicking here.
For questions or concerns, call us at (732) 681-6003.
View our extensive list of Cabinet Glass.
It's that easy!